Email:  support@CHRISTbilt.com

Tel: 1.888.425.7755

Fax: 1.866.787.4974

 

The ALPHA and OMEGA of Steel Buildings!

 

CHRISTbilt, PBCI, PIONEER:  DIVISIONS OF PANELMASTER STEEL BUILDINGS, INC.

Dimensions:  32x48x9

 Listed price includes:

90 mph wind, 20 psf live load, exposure B, seismic 2B, (1) 8x8 framed opening, 26 gauge painted walls and trim, 26 gauge galvalume roof, and all bulleted items below.  If you require anything other than these specifications, we can create and post a listing on eBay for purchase on eBay with your exact specifications.  Worldwide shipping available. 

• ALL PRE-CUT, PRE-PUNCHED (WHERE APPLICABLE) RED-OXIDE PRIMER COMPLETE PRIMARY (RAFTERS, COLUMNS) AND SECONDARY (GIRTS, PURLINS, DOOR FRAMES) FRAME SYSTEM

 

• COMPLETE ARCHITECTURAL TRIM:  EAVE, RAKE, CORNER, DOOR JAMB/HEADER

 

• ALL LONG-LIFE FASTENERS, LAP TEKS, AND SELF-DRILLING SCREWS

 

• FULLY WEATHER SEALED: INSIDE, OUTSIDE CLOSURES

 

• COMPLETELY WEATHER-SEALED ROOF

 

• PRE-FORMED RIDGE CAP

 

• OVER-ENGINEERED FRAME FOR INCREASED STRUCTURAL INTEGRITY

 

• INDUSTRY-BEST 70 YEAR STRUCTURAL DESIGN WARRANTY

 

• COMPLETE ASSEMBLY DRAWINGS AND ANCHOR BOLT PLAN- ALL STAMPS AVAILABLE

CHRISTbilt is a worldwide designer and supplier of pre-engineered and prefabricated steel buildings, metal building systems and metal building components, as well as complete engineering and architectural services, project consultation, and design-build: which includes every aspect of a complete “turnkey” building project from the ground up.  Our products and services are designed to allow you to maintain your desired level of control and involvement in your building project by either:

·         Acting as your own general-contractor in order to maintain maximum cost-control and project completion times to your satisfaction, (Over 65% of our customers for projects 6,000 square feet or less choose to erect their own buildings to save tens-of-thousands of dollars and the headache of micromanaging multiple subcontractors.) or,

·         Implementing our expertise to complete all or select parts of your turnkey project. 

 

Our Mission and Goals:

·         EQUIP you with all the necessary information that you need to make a good, educated decision, with NO pressure, NO gimmicks, and NO sales pitch

·         DELIVER UNPARALLELED quality service and materials at UNBEATABLE prices

·         SUPPLY you with THE INDUSTRY-BEST website that is THE MOST user-friendly, quick and simple, non-obtrusive/non-invasive interface available on the Internet

·         EMPOWER you with INDUSTRY-LEADING TECHNOLOGY to price your building and components IN AS FAST AS 30 SECONDS OR LESS- UNRIVALED in the building industry

 

Thanks for the chance to be COMPETITIVE to EARN your business on your building project with NO pressure, NO gimmicks, and NO sales pitch.

ALL of our straightwall prefabricated building systems and components INCLUDE the following industry-best specifications and features:

• ALL PRE-CUT, PRE-PUNCHED (WHERE APPLICABLE) RED-OXIDE PRIMER OR GALVANIZED COMPLETE PRIMARY (RAFTERS, COLUMNS) AND SECONDARY (GIRTS, PURLINS, DOOR FRAMES) FRAME SYSTEM

 

• COMPLETE ARCHITECTURAL TRIM:  EAVE, RAKE, CORNER, DOOR JAMB/HEADER

 

• ALL LONG-LIFE FASTENERS, LAP TEKS, AND SELF-DRILLING SCREWS

 

• FULLY WEATHER SEALED: INSIDE, OUTSIDE CLOSURES

 

• COMPLETELY WEATHER-SEALED ROOF

 

• PRE-FORMED RIDGE CAP

 

• OVER-ENGINEERED FRAME FOR INCREASED STRUCTURAL INTEGRITY

 

• INDUSTRY-BEST 70 YEAR STRUCTURAL DESIGN WARRANTY

 

• COMPLETE ASSEMBLY DRAWINGS AND ANCHOR BOLT PLAN- ALL STAMPS AVAILABLE

Cold Formed

·  Coils pre-coated with red-oxide primer before fabrication

·  Tensile strength is at least 57,000 psi

·  Minimal coil gauge/thickness ranges between 16 and 12 gauge

·  Minimal Web depths are 4”, 6”, 8", 10", and 12"

 

Primed Versus Galvanized Components

Steel and iron that is protected by red-oxide primer is a much more cost-effective and valuable option than galvanized.  That is why "red iron" is used in the majority of commercial, industrial, agricultural, and residential out-building construction projects- from dog houses to stadiums. Galvanized is a strong alternative in extraordinarily uncommon corrosive environments such as salt-water corrosion zones, high-acidity rain zones, chemical plants, etc.  Galvanized steel cannot be factory-painted in-house, it cannot be curved without cracking the finish, and fatal fumes are produced when attempting to weld galvanized metal  Though it is resistant to red rust oxidation, galvanized metal is susceptible to white rust oxidation.

Red-oxide primer is designed to protect the steel before it is erected, For additional costs, some manufacturers just spray-paint manufactured components. Cold-formed steel is always fully primed before fabrication, and the red-oxide coat is baked on all our “red-iron” frames and components.

General Panel specifications

• All 26 gauge material is .0185 mil, minimally 80,000 PSI.
• All 29 gauge material is .0157 mil, minimally 80,000 PSI.
• Bare panels coated with Galvalume Plus® or Acrylume.
• Painted panels consist of Galvalume®-coated substrate or Acrylume that is prepped and coated with silicon-polyester paint before fabrication.
• Galvalume Plus® or Acrylume panels covered by up to a 40-year warranty.
• Painted panels covered by up to a 40 year paint warranty.

Wall panels

• Common gauge: 26
• Common panels: painted PBR or other from our extensive profile selection
• Optional painted architectural panel
• Optional bare Galvalume Plus® or Acrylume PBR, or other from our extensive profile selection
• Optional colored or Galvalume Plus® or Acrylume
• Optional Kynar paint

Roof panels

• Roof system meets Underwriter's Laboratories Class 90 wind uplift rating
• Common gauge: 26
• Common paneling: Bare Galvalume Plus® or Acrylume PBR
• Optional painted PBR panels or other from our extensive profile selection
• Optional Kynar paint
• Optional standing seam

Soffit

• Common gauge: 26
• Common paneling: painted PBR or other from our extensive profile selection
• Optional bare Galvalume Plus® or Acrylume PBR or other from our extensive profile selection
• Optional Kynar paint

Liner and partition panels

• Common gauge: 29
• Common paneling: choice of painted PBR or other from our extensive profile selection
• Optional 26 gauge panels

Hawaiian Blue	Crimson Red	Fern Green
Burnished Slate	Koko Brown	Aztec Gold
Charcoal Gray	Ash Gray	Saddle Tan
Desert Sand	Polar White	Rustic Red
Light Stone	Colony Green	Gallery Blue

 

Roof fasteners

The most common culprit of rust in metal roofs is the screw. The finish (Galvalume or Acrylume coating or paint) protects the exposed surface of the panels, however the screws penetrate this painted surface and make direct metal-to-metal contact. If the screws do not seal properly or rust themselves, they will cause the panels to rust.

CHRISTbilt supplies only the highest-quality self-drilling screws for use with its roof panels. These deluxe fasteners have a zinc-aluminum alloy "Zac" head that cannot red rust. Its cupped design and SPDM sealing washer also protect the connection from moisture. CHRISTbilt offers a lifetime red-rust warranty on all roof fasteners.

NO PRESSURE!  NO GIMMICKS!  NO SALES PITCH!  JUST THE INFO YOU'RE LOOKING FOR...HASSLE FREE! 

 

DON’T BE SOLD ON MANY COMPETITORS’ HIGH-PRESSURE “PRICE-INCREASE”, “LEFTOVER”, “CANCELED”, “FACTORY OVER-STOCK” SALES PITCH! 

 

Be careful with companies that use negative selling to slander other companies because they can’t compete with other companies like us with respect to quality and price.  These negative selling companies will say things like “they can’t sell you that building for that low of a price unless something is wrong with their building system.”  You can overcome this negative selling and lack of salesmanship by contacting any of the many, many references we provide at the bottom of this email, thousands more not contained in this email, and our 100% positive feedback on eBay, which speaks for itself.

 

If so many of these dealers and salesmen are “the factory” as they claim to be, why are some of their prices double ours???  We are not controlled by the handful of producers of arch style buildings that 99.9% of these dealers and salesmen on eBay and elsewhere buy from, nor are we controlled by the handful of producers of red-iron frame buildings that close to the same percentage of these dealers and salesmen buy from, so we have 100% control of the pricing structure that we convey to prospective customers, without middleman mark-up that most of these dealers and salesmen are subject to. 

 

YOUR PROCEDURAL CHECKLIST FOR PURCHASING A STEEL BUILDING SYSTEM:

1. Don’t let any steel building system salesman attempt to sell you the HIGH-PRESSURE, “LEFTOVER”, “CANCELED”, “FACTORY OVER-STOCK” sales pitch. This pitch is not true!!!  Less than 1% of steel building system orders fall into this category on a global industry scale, EXCEPT FOR THESE COMPANIES THAT TRICK CUSTOMERS WITH THIS SALES PITCH.  THESE COMPANIES TEND TO HAVE MUCH HIGHER CANCELATION PERCENTAGES AS A RESULT OF THEIR DECEPTION.   IF THE STORY IS TOO GOOD TO BE TRUE, IT PROBABLY IS!
2. Don't be pushed into an unrealistic timeframe in which you have to place a deposit on a steel building system in order to get in on some fantastic deal.  FOR EXAMPLE:  “you have to be able to make a decision and put some money down in the next day or two in order to get the 50-70% discount.”
3. Don't buy a steel building system from any supplier unless you can verify that it can be produced to satisfy your local engineer design criteria for your county.
4. Don't place more than 25% deposit on any steel building system, which is more than enough to cover engineering and any fabrication costs.  WITH A 25% DEPOSIT IN GOOD FAITH AND TRUST FROM A CUSTOMER, THE STEEL BUILDING SYSTEM SUPPLIER SHOULD EARN THE OTHER 75% OF A CUSTOMER’S TRUST.
5. Don't sign any contract unless you are given the option of selecting your own delivery timeframe, or the timeframe is indicated on your contract.  The last thing the customer needs is costly delays.
6. Don't buy any steel building system unless you have verified that supplier with the Better Business Bureau and Dun & Bradstreet (SEE OUR D & B CREDENTIALS BELOW).
7. Don't sign any contract without clearly identifying all steel building system accessories.
8. Don't buy any steel building unless you can verify at least 3 references in your area. (SEE OUR REFERENCE LISTS BELOW.) This is a great way to check out the promises that are made and more importantly, ultimately kept by any steel building system supplier.
9. Don't buy a steel building system without receiving reference or preliminary drawings on your building.
10. If WE DON’T cover and satisfy EACH AND EVERY ONE of these very important points WE DON’T DESERVE YOUR BUSINESS. 

We appreciate the chance you have given us to be COMPETITIVE to EARN your business on your building project with:

HONESTY

INTEGRITY

OUR ABILITY AND WILLINGNESS TO GO THE EXTRA MILE

WORLDWIDE MANUFACTURING AND DISTRIBUTION

EDUCATIONAL INFORMATION

CHRISTbilt/PANELMASTER is proud to provide the following references and credentials:

 

Panelmaster Steel Buildings, Inc./CHRISTbilt Dun and Bradstreet # 147449735

 

• US Navy- China Lake, CA; Charlestown, MA

 

• Edwards Air Force Base- Barstow, CA

 

• MacDill Air Force Base- Tampa, FL

 

• Department of Veterans Affairs- Honolulu, HI

 

• Fish and Wildlife Department- Bald Hill, Waterbury, VT

 

• Massachusetts Corrective Institute- Norfolk, MA

 

• New York City Department of Corrections- New York, NY

 

• University of Virginia- Charlottesville, VA

 

• University of Nevada- Reno, NV

 

• Norfolk Naval Base- Norfolk, VA

 

• U. S. Customs- Front Royal, VA, Indianapolis, IN

 

• Texas Department of Transportation- Beaumont, TX

 

• U.S. Air Force- Dover, DE